(314) 920-3151

Step 1: Pre-Inspection

Every great carpet cleaning experience starts with a proper pre-inspection. Our service technician will inspect your particular areas of concern as well as noting carpet construction and soiling conditions. You will also be advised of any possible permanent staining that is unable to be removed.

Step 2 – Pre-Spray & Pre-Spot

Traffic areas and spots are pretreated with a hot, organic, pre-spray for more effective soil and spot removal.

Step 3 – Extract & Rinse

Once the soil has been loosened, our state-of-the-art truck-mounted hot water extraction will thoroughly flush the carpet pile with an organic rinsing agent. Pressure and heat are regulated so that carpet is not over-dampened. We clean with water temperature between 180-190°F.

During the treatment process, a hospital-grade disinfectant is used to help prevent to the growth of germs and allergens.

Step 4 – Final Walkthrough

Walkthrough to inspect our work.

After your carpet is cleaned…

  1. Be careful walking from carpet to hard surfaces. Floors can be slippery!
  2. Keep pets and children off the carpet for at least 6 hours.
  3. Remove blocks and tabs, placed by us, 24 hours after carpet is cleaned.
  4. Wait 24 hours before vacuuming

(314) 920-3151